11 Structure(s) Indiors Currently posted here:
GMTS-Matrix, GMTS-Tape, GMTS-Dash in archive 'GMTS v1.10.zip'
Stoch-MTF, Stoch-Tape
GMTS-Matrix:
GMTS-Matrix is a non-repainting matrix indior to Be Used with the Genesis Matrix Trading System. Kudos for its T3MA to Cody_R.Uses the following indiors:
1. TVI
2. CCI
3. Gann High/Low Activator Indior
4. T3 Moving Average Multi time-frame. All bars in the chart corresponding to some greater time-frame bar will be updated to reflect the current condition of the greater time-frame indior. Optional awake when all 4 indiors lineup. Set labels of your own choice. GMTS-Tape:
GMTS-Tape is a tape chart of the #8216;Genesis Matrix Trading System#8217; Matrix indior.
GMTS-Dash:
GMTS-Dash is a signal dashboard for your #8216;Genesis Matrix Trading System#8217;. It shows the current matrix signs for multiple time-frames and the ADR.
Notice!
- Corner placing requires that dlls are permitted to get the job done.
- Custom indior check requires that dlls are permitted to get the job done.
- GMTS Dash REQUIRES MT4 Construct 509 or Newer. If it crashes your version of MT4, remove it from the indiors folder and restart MT4.
__________________________________________________ _____________
Matrix-Signals:
Matrix-Signals is a signal/alert generating indior for use with the #8216;Genesis Matrix Trading System#8217;. It generates alerts when 4 or 3 lines of the matrix lineup. 3 lines generates an #8216;examine signal#8217; and 4 lines generate an #8216;enter signal#8217;.
Features:Monitor up to 20 symbols of your own choice.
The voice alarms may not work correctly for non-forex symbols. Alert when 4 or 3 indiors lineup. Audio (voice/bell) and visual alarm signals. Popup on alert signal. Notice:
The listing of symbols to track should be without the brokers prefix and suffix. Enter the suffix or prefix from the corresponding parameter field.
'dll imports' need to be enabled with this indior.
__________________________________________________ _____________
Stoch-MTF:
MTF Stochastic with linear interpolation between bars on the greater time-frames.
Features:Linear interpolation of values between bars. Dots can be used to label the final lower time-frame bar on the line. Double color to denote rising/over purchased and Falling/oversold. NOTE! Place parameter 'Stoch.PriceField=0' for use with the Genesis Matrix System
__________________________________________________ _____________
Stoch-Tape
MTF Stochastic Tape Chart Indior.
Features:Divider lineup to set sets of lower time-frame bars to ease reading the chart. Various colours for rising/overbought and falling/oversold. NOTE! Place parameter 'Stoch.PriceField=0' for use with the Genesis Matrix System
__________________________________________________ _____________
ASCTrend1 IndiorsASCTrend1 arrow ASCTrend Tape Chart ASCTrend Matrix 2TF ASCTrend Matrix 3TF ASCTrend Matrix 4TF NOTE! The Tape and matrix indiors require the ASCTrend1i.mq4 indiors is installed and working
__________________________________________________ _____________
Upgrades
2014-02-24Matrix-Signals Upgraded v1.601
- Use TERMINL_DATA_PATH to loe documents rather than TERMINAL_PATH
Affects files Matrix-Signals. mq4 and Matrix-Signals.dll
2014-02-18GMTS-Dash Upgraded v1.602
- Clear items on load to ensure screen order
- Added TVI Mode: ZeroCrossing/SlopeDirection 2014-02-17Stoch-MTF Upgraded v1.601
- Fixed initialization error on startup of terminal ASCTrend-Tape v1.601
- Fixed array out of range error. 2014-02-15Stoch-MTF and Stoch-Tape Updated v1.600
- Update to Build 600 /MT4.5
- Stoch-Tape: Added Slope or KoverD selector for dual color lineup. 2014-02-15Matrix Signs 1.600 - Update to Build 600 .
- Removed custom indior check which will not utilize sub-folders. 2014-02-12ASCTrend1 1.600
- Update to Build 600 .
- Added alert sounds for buy and sell.
- Removed custom indior check which will not utilize sub-folders. GMTS 1.600
- Update to Build 600 .
- Removed custom indior check which will not utilize sub-folders.
- Fixed dashboard header text not showing in construct 600 . 2013-11-28GMTS-Matrix v1.10
- Updated code to encourage MT4 build 550 and larger and keep compatiblilty with construct 500 GMTS-Tape v1.10
- Updated code to encourage MT4 build 550 and larger and keep compatiblilty with construct 500 GMTS-Dash v1.10
- Updated code to encourage MT4 build 550 or greater and keep compatibility with construct 509
- Increased the maximum number of timeframes from 4 to 6.
- Added parameters to correct the ADR bar-graph dimensions and position to correct for desktop scaling.
Some what crude but it gets the work done and is far better than nothing. GannHiLo-Histo
- Updated code to encourage MT4 build 550 and larger and keep compatiblilty with construct 500 T3MA-Basic
- Updated code to encourage MT4 build 550 and larger and keep compatiblilty with construct 500 2013-05-12ASCTrend v1.01
- centric upgrading of bars all timeframes as new data has been downloaded.
- draw clean dot if there's not data for the bar. 2012-11-11Matrix-Signals v1.01
- Added Symbol Prefix parameter. Notice: The listing of symbols to track should be without the brokers prefix and suffix. Enter the suffix or prefix from the corresponding parameter field.
- Eliminate symbol prefix, suffix and non alphanumeric chars from symbol string sent to alarm app.
- Correct the dimensions of the alert window into account for the background font size variations.
- Read out 5 digit symbols.
- Check if all files are installed on start up and check that dll imports is enabled.
- Improved symbol validation function.
- Added blink time parameter in '. . /experts/files/MatrixSignals. Ini' to correct the blink time that is awake. Default BlinkTime=60. An individual will have to edit the ini file to change the value. 2012-09-13Stoch-Tape. Mq4 v1.01
- Eliminate gaps on 4 digit brokers caused by lack of numerical resolution. 2012-09-11Matrix-Signals v1.00
- Title changed to Matrix-Signals (was GMTS-Signals)
- Fixed to work with windows 2012-09-10GMTS-Signals v1.00 uploaded.
2012-09-07GMTS-Tape and GMTS-Matrix updated to v1.01
- yank divider lines between the bars. Removed Divider.OnCloseBar parameter. 2012-09-07GMTS-Tape and GMTS-Matrix updated to v1.01
- Added period divider lines to the Greater time-frame instances 2012-09-05Added Stoch Tape and MTF-Stoch. Changed name of STSn collection of indior to GMTS and version nr to 1.00. GMTS-Matrix and GMTS-Tape:
- Switched place of the T3 and GHL to generate design the same as the official genesis matrix.
- Added MaxBars parameter into T3 to decrease load time. Set for full history to 0. GMTS-Dashboard:
- Switched place of the T3 and GHL to generate design the same as the official genesis matrix.
- Added window parameter.
- Fixed dashboard proceeding when changing charts with dashboard on the right. It still opens up at the middle as MT4 appears to be originally draw the chimney non-maximized and doesn't re-size them until they are triggered. 2012-07-16STSn Dash updated to v1.03
- Fixed ADR Value upgrade 2012-07-16STSn Dash updated to v1.02
- Fixed ADR Position
- Clear items on init()
- Added symbol text in name
- Allow Multiple instances with Various symbols on the same chart Set of non-repainting indiors. V1.01 Fixed Alert.Sound in Matrix and Tape Fixed bug in ADR Calc that caused crash if there was no data from the history. 2012-07-13STSn Set of non-repainting indiors. v1.00 __________________________________________________ _____________
Construct 509- Indiors:
Attachment 1034969
Attachment 1077122
__________________________________________________ _____________
Construct 600 Indiors:
https://www.forexsoutheast.asia/atta...2687065139.mq4
https://www.forexsoutheast.asia/atta...3599670213.mq4
https://www.forexsoutheast.asia/fore...al-2008-a.html
https://www.forexsoutheast.asia/fore...-220-99-a.html
https://www.forexsoutheast.asia/gene...ity-check.html
https://www.forexsoutheast.asia/fore...133-forex.html