ATR Dashboard indicator
Page 1 of 733 123 LastLast
Results 1 to 10 of 329

Thread: ATR Dashboard indicator

  1. #1
    The indior below is used to display up to 14 pairs along with the projected high and low with a 5 day ATR.

    Many thanks to bandung for his job. I am in awe.

    It is based on this indior...

    Attachment 636484

    which draws two lines on your chart using a 5 day ATR calculations. 1 line relies on the low for the day the ATR....that's the potential for the day. The line relies on the day minus the 5 day ATR's high. . .or the potential low for the day. It seems like this:



    So the dashboard allows for a fast picture of this observation accross 14 pairs. This pic looks like this...



    So the available to the day is displayed in the middle. As price moves above or below the open, the price is displayed along with the percentage of the daily range that's been filled. The pips into the potential high (low 5 day ATR) is displayed and pip into the potential low (large - 5 day ATR) are displayed along with the price for the respective amounts.

    Other settings are possible. Enjoy!!!

    Many many thanks to bandung for his programming onto this indior.

    Cheers

    https://www.forexsoutheast.asia/atta...1599381119.mq4
    https://www.forexsoutheast.asia/atta...6423114340.tpl

  2. #2
    Thanks to this indi! It would be nice to modify the openinghour, thus it could be used by us with the method.

  3. #3
    I found this fantastic Dashboard, but it could be useful, that I would have the ability to adjust Time zone of data, so It could be used with various brokers with distinct time zones. I hope somebody could help. I've this indior for ADR calculation. It works for all time zones. Thank you for this article!

    https://www.forexsoutheast.asia/atta...4148356421.rar

  4. #4
    Does one else have difficulties with the ATRDashboard along with the MT4 Build 646?

    Incorrect calculation and display errors. .

  5. #5
    Quote Originally Posted by ;
    Does someone else also have problems with the ATRDashboard along with the MT4 Construct 646? Incorrect display and calculation errors. .
    Same build same error also.

    Anyone can mod and recode, or is there other version somewhere?

  6. #6
    Go to line 472,477,478 switch char. . .should compile:

    series addChar(string str, string char1, int maxlength, bool atbeginning = authentic )
    {
    int l = maxlength - StringLen(str);
    for (int I=0; ilt;l; I )

    if (atbeginning) str = char1 str;
    else str = str char1;

  7. #7
    2 Attachment(s)
    Quote Originally Posted by ;
    Proceed to line 472,477,478 switch char into char1. . .should compile: series addChar(string str, string char1, int maxlength, bool atbeginning = true) { int l = maxlength - StringLen(str); for (int I=0; ilt;l; I ) if (atbeginning) str = char1 str; else str = str char1;
    thanks.how do we fix the left side which is blank now.



    Should appear like this

  8. #8
    Quote Originally Posted by ;
    quote thanks.how might we fix the left side which is blank now. picture should appear like this picture
    Trying to figure that one out...

  9. #9
    Hey guys, I use this indior and it works fine on the newest build 670.

    Could it be because I installed it months before the 600 assembles? I think I downloaded it not certain.

    Food for thought...

  10. #10
    Quote Originally Posted by ;
    Hey guys, I use this indior and it works good on the latest build 670. Could it be because I set it months before the 600 assembles? I believe I downloaded it not sure. Food for thought...
    I reconstructed the first document on a 509 build and it works on my 670 build so you need to use this....tnx symonahttps://www.forexsoutheast.asia/atta...2142547028.ex4

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.